Radio replacement interface for select Toyota vehicles. It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio. This enhanced interface retains the factory rear-view (backup) camera and is also pre-programmed for retention of steering wheel controls.
- Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.
- Pre-programmed to retain factory Steering Wheel Controls.
- iPhone Voice Recognition (VR) feature from SWC on select radios.
- Retains OEM Rear View Camera.
- Retains factory USB and auxiliary audio input (aftermarket radio must have these features).
- Includes factory USB retention adapter cable.
- Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models.
- Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.
- EIA color coded wiring for easy installation
Compatibility
SCION
2016 iM
2012 – 2013 iQ
TOYOTA
2013 – 2019 4Runner
2012 – 2018 Avalon
2012 – 2017 Camry
2012 – 2019 Corolla
2013 – 2019 Highlander*
2009 – 2013 Matrix
2012 – 2020 Prius
2012 – 2018 RAV4
2012 – 2019 Sequoia**
2015 – 2017 Sienna
2013 – 2019 Tacoma
2013 – 2019 Tundra**
2012 – 2016 Venza
Notes:
* 2013-2018 Highlander vehicles without OEM Navigation radio will NOT retain the factory back up camera.
** On 2013 Toyota Sequoia and Tundra, the parking brake wire (RED wire) is in position #1 on the OEM 28-pin connector. Please insert the YELLOW/BLACK wire on the SWRTY-61N harness into position#1. For all other models, please insert into position # 15. Please check that you are inserting the pin into the correct location as it is difficult to remove it again. The locking tab of the pin should be facing UP when it is inserted into the connector.