Stereo harness fits all C-NET BUS 16-pin Clarion Radios.
Compatible with Aftermarket Stereos Clarion Ce-Net 16-pin
WILL WORK ONLY WITH 16 PIN MODELS that have Ce-NET
Also Replaces Clarion Part # 854-634-950
Wires are 7" in length
This harness is for Aftermarket RADIO [THE WIRE HARNESS]
Aftermarket Radios have their own wire harnesses
(if yours got lost or damaged) this will be invaluable replacement
Our Wire harnesses are standard E.I.A color coded
no more guessing, no more mistakes, no more mess.
Professional results every time!
Clarion ce-Plug Info
16 PIN Plug Ce-Net CLARION STEREOS
Use when installing an CLARION stereo into car without cutting wires!
Plugs into 16PIN ce-Net CLARION Stereos
Works with 1991 and up Radios (sample list below)
|
DB225
DB245
DB235
DB335
DB125
DB316
DB336MP
DB455MC
DB345MP
DXZ545MP
DXZ645MP
DXZ745MP
|
DXZ845MC
DXZ945MP
DXZ835MP
DXZ855MP
DXZ735MP
DXZ755MC
DXZ655MP
DXZ615
DXZ555MP
DXZ935
XDZ716
XDZ616
|
-
HAS ILLUMINATION - AND AMP TURN ON (REMOTE WIRE)
End the hassles & guess work of hooking up your new head unit.
-
Easily hook up car stereos like a pro
(Saves time and money)
-
Wire Harnesses are designed with the installer in mind.
EIA Color Codes
HOW TO WIRE AN AFTERMARKET STEREO
EIA Wire Color Codes - Aftermarket Radio Association Standard
Color codes for stereo connector harness conform to the EIA
(Electronics Industry Association)
Always refer to stereo's owner's manual for specific wiring details
(before making any connections)
CAUTION: CHINA Direct colors may differ from the wiring colors found on your stereo.
EIA Color Code by Grand Theft Audiophile
|
| Yellow |
12V Battery / Constant
|
| Red |
12V Ignition / Switched
|
| Black |
Ground *Chassis Ground
|
| Black / White |
**Factory Amplifier Ground
|
| Blue |
Power Antenna |
| Blue / White |
Factory Amplifier Remote Turn On
|
| Orange |
***Illumination |
| Orange / White |
***Illumination |
| Orange / Black |
***Dash Light Dimmer / Illumination |
| Brown |
Mute / Not Used - (unless for amp turn-on) |
| White |
Left Front Speaker (+) |
| White / Black |
Left Front Speaker (-) |
| Gray |
Right Front Speaker (+) |
| Gray / Black |
Right Front Speaker (-) |
| Green |
Left Rear Speaker (+) |
| Green / Black |
Left Rear Speaker (-) |
| Purple |
Right Rear Speaker (+) |
| Purple / Black |
Right Rear Speaker (-) |
|
RCA Color Location/Function (if not just Red/White)
|
|
White RCA
|
Left Front Speaker |
| Gray RCA |
Right Front Speaker |
| Green RCA |
Left Rear Speaker |
| Purple RCA |
Right Rear Speaker |
|
RCA Red / White (if not colored)
|
| Red RCA |
Right input |
| White RCA |
Left input |
|
Additional Notes:
- Cap and insulate all unused wires individually to prevent short circuits.
- This wiring harness may not include all wire colors listed above
- Not Uncommon to have un-used wires.
- *Chassis Ground (some harnesses omit the black wire)
- Factory separate wire directly to metal Chassis at Radio Location
- **Amp Ground (not used very often) Ground wire on plug is sufficient
- ***Orange (mostly never used) Aftermarket Radios are self illuminating
- (Sometimes - the SOLID BLUE wire can be Used as an AMP Turn On wire)
|
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
