General Features:
- Double DIN Installation Dash Kit w/pocket/ ISO Radio
- Compatible with 2012-UP Chevrolet Sonic
- Specially designed side mount brackets
- Designed to match factory dash contours
- Gap-less fit between the dash and the kit
- Painted to match factory dash color
- High-grade & Heavy-duty ABS plastic structure
- Factory style texture
- Color: Black
Kit Includes:
- Radio Housing
- ISO Brackets
- ISO Trim Plates
- Radio Replacement Digital Interface Module
Radio Replacement Interface
- Radio Replacement Interface w/ SWC & Navigation Outputs
- Retains OnStar when the factory radio is replaced
- Retains Factory Bluetooth (2010-UP model vehicles)
- Retains all warning chimes (chime module included)
- Built in pre-programmed SWC retention
- Chime volume adjustment (factory buttons)
- OnStar volume adjustment
- Retained accessory power output (R.A.P.)
- Reverse Wire output
- Vehicle Speed Sense (VSS) output
- Illumination output
- Parking brake output
- Includes antenna adaptor
- Retains lane departure warning system
- Retains OnStar Turn-By-Turn voice prompts
Compatibility List:
Chevrolet:
- Authorized Internet Dealer
EIA Color Codes
HOW TO WIRE AN AFTERMARKET STEREO
EIA Wire Color Codes - Aftermarket Radio Association Standard
Color codes for stereo connector harness conform to the EIA
(Electronics Industry Association)
Always refer to stereo's owner's manual for specific wiring details
(before making any connections)
CAUTION: CHINA Direct colors may differ from the wiring colors found on your stereo.
EIA Color Code by Grand Theft Audiophile
|
| Yellow |
12V Battery / Constant
|
| Red |
12V Ignition / Switched
|
| Black |
Ground *Chassis Ground
|
| Black / White |
**Factory Amplifier Ground
|
| Blue |
Power Antenna |
| Blue / White |
Factory Amplifier Remote Turn On
|
| Orange |
***Illumination |
| Orange / White |
***Illumination |
| Orange / Black |
***Dash Light Dimmer / Illumination |
| Brown |
Mute / Not Used - (unless for amp turn-on) |
| White |
Left Front Speaker (+) |
| White / Black |
Left Front Speaker (-) |
| Gray |
Right Front Speaker (+) |
| Gray / Black |
Right Front Speaker (-) |
| Green |
Left Rear Speaker (+) |
| Green / Black |
Left Rear Speaker (-) |
| Purple |
Right Rear Speaker (+) |
| Purple / Black |
Right Rear Speaker (-) |
|
RCA Color Location/Function (if not just Red/White)
|
|
White RCA
|
Left Front Speaker |
| Gray RCA |
Right Front Speaker |
| Green RCA |
Left Rear Speaker |
| Purple RCA |
Right Rear Speaker |
|
RCA Red / White (if not colored)
|
| Red RCA |
Right input |
| White RCA |
Left input |
|
Additional Notes:
- Cap and insulate all unused wires individually to prevent short circuits.
- This wiring harness may not include all wire colors listed above
- Not Uncommon to have un-used wires.
- *Chassis Ground (some harnesses omit the black wire)
- Factory separate wire directly to metal Chassis at Radio Location
- **Amp Ground (not used very often) Ground wire on plug is sufficient
- ***Orange (mostly never used) Aftermarket Radios are self illuminating
- (Sometimes - the SOLID BLUE wire can be Used as an AMP Turn On wire)
|
Dash Install Kits Q&A
| Dash Kit ( Why its a Good Idea ) |
Why do I need a Dash Kit?
Today's cars have rounded edges, sometimes funky looking convex and curved stereo faces.
Dash Kits are designed to match your car radio console. For a Gapless fit with Aftermarket Radios.
Many auto makers factory radios are bigger than aftermarket radios (Some will need a Pocket or Delete Plate)
(Read Below) **
The sole purpose of an install dash kit, is to blend the new aftermarket radio so it looks like it belongs.
Professional Install shops use these very same Dash Kits when installing new Aftermarket Car Stereos
Radio in-dash installation kits are designed, specifically for particular vehicles
* EXAMPLE : AFTERMARKET RADIO IS A SINGLE DIN & OEM RADIO WAS LARGER SIZED 2 DIN
(DEFINITELY WILL NEED DASH KIT - if wanting to close up the gaps)
What is a Single-DIN, 1.5DIN, Double-DIN & Shaft Radio Mean?
"Single DIN" = Standard Aftermarket Radio Size
"Shaft Style"= Old type of radios w/ Knob Controls
1.5 DIN = Mostly Used by GM (in the Late 90's - early 2000's)
2 DIN = Many Stock Import Radios - 2xs size of Single DIN (often referred to as a Double Din) |
| Careful of Direct Imports from China & Abroad |
Unfortunately there's an increase of Cheap Stereos being sold on ebay ; Amazon and the web, that do not fit the AIAA Standards.
Many China radio models will not work with Dash Kits, because they do not pay the membership to the AIAA Aftermarket Association Guidelines : (Stick with Brand Names) just to be on the safe side.
Why? Because they make their 7in screens to fit into locations that do not require a fitment dash kit. *They do not have the info on size fitments.
Not only are they oversized, some have Odd Wiring; and don't follow the 35yr old EIA color code. Don't have detailed info from the Manufacturing Companies who make the vehicles.
Companies like Alpine, Clarion, Kenwood, Pioneer (except some *AVIC), JVC all fit; due to industry collaboration. Morotorized flip screens have similar Issues*
Please Double Check the size of your aftermarket radio before purchasing this kit.
Boss and Eonon radios are notorious for being over-sized, please be cautious when purchasing these radios.
There is Not a Dash Kit on the market that will accommodate these oversized Non Branded Radios. In essence, you get what you pay for, and unfortunately it becomes everyones problem on their attempted profit.
Double Din kits are design for use with USA Standard Double Din radio models only that are 6.2" 173mm x 99.8mm to 7" 180mm x 102mm (anything over 180mm will need to be trimmed)
|
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
